Evaluation of a modification in ASTM C1609 standard for the study of synthetic fiber reinforced concrete under flexural load
Kaydedildi:
| Yazarlar: | , |
|---|---|
| Materyal Türü: | artículo original |
| Durum: | Versión publicada |
| Yayın Tarihi: | 2020 |
| Diğer Bilgiler: | The following study evaluated the viability of a modification in the procedure established in ASTM C1609 in order to lay evidence of the usefulness, or not, of the aforementioned standard in the testing of synthetic fiber reinforced concrete (SNFRC). Likewise, a comparison between the results obtained in flexural tests developed in accordance with EN14651 and those provided by the American statute was realized. A pseudoductil performance was found for SNFRC in which the addition of fibers allowed the concrete to resist loads even after its modulus of rupture was reached. Also, it was determined that a reduction in the loading rate established in ASTM C1609 allows for a higher probability of success for the test, especially when low fiber content is used. Furthermore, the speed reduction did not affect the results provided by the test. The European standard did not cause any inconvenience in the test execution, nevertheless, its results were not completely comparable to those obtained via de American normative. |
| Ülke: | Portal de Revistas UCR |
| Kurum: | Universidad de Costa Rica |
| Repositorio: | Portal de Revistas UCR |
| Dil: | Español |
| OAI Identifier: | oai:archivo.portal.ucr.ac.cr:article/38567 |
| Online Erişim: | https://archivo.revistas.ucr.ac.cr/index.php/materiales/article/view/38567 |
| Anahtar Kelime: | capacidad residual concreto reforzado con fibras sintéticas módulo de ruptura ASTM C1609 tasa de aplicación de carga load application rate modulus of rupture residual capacity synthetic fiber reinforced concrete |