Development of correlations to determine the liquefaction potential by applying the piezocone test (CPTu) in a calibration chamber (CC).

 

Tallennettuna:
Bibliografiset tiedot
Tekijä: Rodríguez Rodríguez, Sebastián
Aineistotyyppi: artículo original
Tila:Versión publicada
Julkaisupäivä:2020
Kuvaus:The main objective of this project was to develop correlations to determine the liquefaction potentialof loose sand deposits, using the CPTu test; for this purpose, it was necessary to determine thebehavior of CPTu tests in the calibration chamber (CC) of the Institute of Soil Mechanics and RockMechanics (IBF) in Karlsruhe Institute of Technology, moreover to determine the resistance toliquefaction by means of cyclic undrained tests for sand samples, also to establish a correlationbetween the relative storage density (ID) of the sample, the tip resistance (qc) of the CPTuand the liquefaction resistance (CRR) of the triaxial tests and finally compare the experimentalcorrelation obtained with existing correlations of the literature. With this project it was concludedthat when comparing the correlations for the experimental materials studied by the IBF, it wasdetermined that in the region of low storage densities and low peak resistances a good similarity.However, for higher densities and, therefore, greater peak resistances, the correlation curvesfor the experimental materials were flatter than in bibliographic references. In other words, theliquefaction resistance of the experimental materials in this area is lower than what the curves ofthe literature would have predicted. Finally, it is not possible to directly apply the results of thisproject in any other sand deposit; since the materials of the correlations made (Kali4) and other
Maa:Portal de Revistas TEC
Organisaatio:Instituto Tecnológico de Costa Rica
Repositorio:Portal de Revistas TEC
Kieli:Español
OAI Identifier:oai:ojs.pkp.sfu.ca:article/5482
Linkit:https://revistas.tec.ac.cr/index.php/tec_marcha/article/view/5482
Sanahaku:Ensayo penetración estática de piezocono (CPTu)
Resistencia de cono en punta qc
Densidad relativa ID
Ensayo triaxial cíclico no drenado
Relación de resistencia cíclica (CRR)
Licuefacción
Cone penetration test with pore pressure measurement (CPTu)
Cone tip resistance qc
Relative density ID
Cyclic undrained triaxial test
Cyclic resistance ratio (CRR)
Liquefaction