EMC Practices focused in the mitigation of Lightning Electromagnetic Pulse (LEMP): Earthing and bonding approach of the IEC 62305

 

Guardat en:
Dades bibliogràfiques
Autors: Malagón-Carvajal, Gabriel, Giraldo-Picón, Wilson, Ordoñez-Plata, Gabriel, Chacón, Julio Cesar
Format: artículo original
Estat:Versión publicada
Data de publicació:2013
Descripció:This paper presents the results obtained during the parameter identification of electromagnetic compatibility in lightning protection systems. It sets out a number of good engineering practices, aimed at mitigation of disturbances, transient type, created by an electromagnetic pulse, generated during the grounding of lightning. These disturbances are often reflected as overvoltage and / or overcurrent radiated and conducted or also called surges, the latter a strong impact on the operation of end use electrical installations by bringing significant cost stops the processes associated with the installation and equipment within the same. The recommendations raised here focus on the issues related to grounding systems described in the standard (IEC 62305-4, 2010), which describes the equipotential network (bonding network) and system ground terminals (earth-terminal system) as basic components of the system grounding (earthing). These practices or recommendations are aimed at start-up, during the design stage of the system, thereby linking the specialties of architecture, civil engineering and electrical engineering, as most should be implemented during the next stage of design, as is the construction of the installation. Finally, this paper describes the basic configurations of equipotential network reviewing the main features, advantages and main components, in turn addresses key system configurations ground terminals and its advantages over electromagnetic interference mitigation.
Pais:Portal de Revistas TEC
Institution:Instituto Tecnológico de Costa Rica
Repositorio:Portal de Revistas TEC
Idioma:Español
OAI Identifier:oai:ojs.pkp.sfu.ca:article/1577
Accés en línia:https://revistas.tec.ac.cr/index.php/tec_marcha/article/view/1577
Paraula clau:Compatibilidad electromagnética (CEM)
Impulso electromagnético del rayo (IER)
Sistema de puesta a tierra
Red de equipotencialización
Sistema de terminales de puesta a tierra
perturbaciones electromagnéticas.
Electromagnetic compatibility (EMC)
LEMP (Lightning Electromagnetic Compability)
earthing system
bonding network
earth-termination system
Electromagnetic disturbances.