Experimental Testing of Wood Framed Walls with Available Materials in Costa Rica
محفوظ في:
| المؤلف: | |
|---|---|
| التنسيق: | artículo original |
| الحالة: | Versión publicada |
| تاريخ النشر: | 2023 |
| الوصف: | This paper presents a research study about timber shear walls, with materials commercially available in Costa Rica. With new developments in engineered timber, the Costa Rican Seismic Code included a chapter on timber structures, defining diaphragms and shear walls as part of the lateral resisting system. A research study was then carried out, with the objective of determining the structural behavior of a typical shear wall. Twelve specimens were constructed and tested, varying the nail spacing and anchorage system. The specimens were tested with monotonic and cyclic loading procedures according to ASTM E564 and ASTM E2126 respectively. It was found that the specimens can develop an adequate shear strength and stiffness if the end studs are adequately anchored to the foundation. These results are an important input for the Costa Rican Seismic Code and for the development of engineered timber in Costa Rica. |
| البلد: | Portal de Revistas UCR |
| المؤسسة: | Universidad de Costa Rica |
| Repositorio: | Portal de Revistas UCR |
| اللغة: | Español Inglés |
| OAI Identifier: | oai:portal.ucr.ac.cr:article/52390 |
| الوصول للمادة أونلاين: | https://revistas.ucr.ac.cr/index.php/ingenieria/article/view/52390 |
| كلمة مفتاحية: | Ductilidad de muros con marcos de madera Ensayos cíclicos de paredes con marcos de madera Ensayos monotónicos de paredes con marcos de madera Muros con marcos de madera Muros de cortante de madera Cyclic testing of wood framed walls Ductility of wood framed walls Monotonic testing of wood framed walls Timber shear walls Wood framed walls |