FRP anchorage usage in reinforced concrete beams externally strengthened with CFRP bands subjected to cyclic loads

 

Guardado en:
Detalles Bibliográficos
Autores: Bazán, Jorge L., Fernández-Dávila, Víctor I, Samaniego, Juan
Formato: artículo original
Estado:Versión publicada
Fecha de Publicación:2020
Descripción:In Peru there is a growing demand to improve, expand or remodel existing infrastructure, which has generally been designed with structural standards less demanding than the current ones. It is for this reason that various techniques are used, such as reinforcement using FRP (fiber reinforced polymer) systems. Among the predominant applications of this system is the reinforcement to bending of reinforced concrete (RC) elements such as walls, slabs and especially the beams. During the application of the FRP, various interferences or constructive limitations could occur, which has led to the approach of practical and modern solutions such as the use of FRP band systems, FRP plates and bars, NSM systems, and the use of anchors made of FRP. These procedures are contemplated in the ACI's guide 440.2R (ACI, 2017), used for the construction and design of external reinforcement with FRP on RC elements. The purpose of this article is to show the results on the laboratory experience of four RC beams, considering that only three of them were externally strengthened to bending, a solution with anchors made of FRP was also used, in order to allow the tensile behavior of the FRP external reinforcement. The specimens tested were subjected to cyclic loads by a quasi-static test, and the results indicate that these elements strengthened with FRP bands and anchors have a resistance capacity greater than the nominal flexural capacity. In addition, the behavior exhibited throughout these tests was stable and without unexpected anomalies that have been observed.
País:Portal de Revistas UCR
Institución:Universidad de Costa Rica
Repositorio:Portal de Revistas UCR
Lenguaje:Español
OAI Identifier:oai:portal.ucr.ac.cr:article/39806
Acceso en línea:https://revistas.ucr.ac.cr/index.php/ingenieria/article/view/39806
Palabra clave:FRP strengthening
FRP anchor
flexure behavior
cyclic loads
bending
Refuerzo FRP
anclaje FRP
comportamiento experimental
carga cíclica
flexión