Characterization of sludge from industries for possible recovery in arts

 

محفوظ في:
التفاصيل البيبلوغرافية
المؤلفون: Rodríguez Mora, Karina, Jirón García, Eddy, Hernández Solís, Verónica
التنسيق: artículo original
الحالة:Versión publicada
تاريخ النشر:2023
الوصف:Sludge from oxidation ponds from different industries was evaluated to study its composition through a chemical characterization and determine a possible route for its recovery. For the characterization of the sludge, gravimetry for SiO2 content, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, X-ray energy dispersion spectrometry (EDS), and X-ray fluorescence (XRF) were used. It was determined that the paint industry sludges have a higher SiO2 content with 17.2 ± 0.2 % by mass and different phases present in the sludges such as albite, quartz, and rutile were identified, as well as metals of interest in pigments such as iron, chrome, and zinc. Demonstrating that even though the matrix is highly complex, there are routes for the use of this residue.
البلد:Portal de Revistas UTN
المؤسسة:Universidad Técnica Nacional
Repositorio:Portal de Revistas UTN
اللغة:Español
OAI Identifier:oai:ojs.pkp.sfu.ca:article/592
الوصول للمادة أونلاين:https://revistas.utn.ac.cr/index.php/yulok/article/view/592
كلمة مفتاحية:Arte
Agua residual
Lodos
Materiales
Pigmentos
Art
Materials
Pigments
Sludge
Wastewater